UK Underfloor Heating :: DIY Zone

5 Easy Steps to Installing Underfloor Heating

1. Fit the Pre-Assembled manifold on the wall.
   click here to view a Pre-Assembled Manifold
   
   
2. Fix self adhesive fixing rail down to floor insulation.
   click here to view a Typical Fixing Rail Layout
   
   
3. Connect underfloor heating pipe to the manifold. Start to lay pipe into fixing rail using insulation clips between fixing rails and on turns. Connect back to the manifold. Repeat for other loop.
   click here to view a Pre-Assembled Manifold
   
   
4. Connect a hosepipe to the taps on the manifold, fill with water.
   click here to view a Pre-Assembled Manifold
   
   
5. Connect to heating following drawing.
   click here to view Connections on System Diagrams

DIY Pack Instructions

You can read the full instructions on this website to install your DIY Underfloor Heating pack.

Alternatively, you can download a pdf version of the same instructions. The file is 158kb in size.

Part of the UK Underfloor Heating Group