Electronic Water Temperature Control

With energy bills rising everybody wants to improve the efficiency of their heating system a lot of people are looking to install underfloor heating to achieve this, UK Underfloor heating are taking efficiency to a new level so as well as offering low running temperatures and multiple room control they are changing how the water temperature in the system is controlled.

Traditionally the flow water temperature within an underfloor heating system is controlled using a mechanical thermostatic head which maintains the water temperature by adjusting the amount of hot water flowing into the manifold but it does not turn off the boiler, UK Underfloor Heating have devised a method of control that electronically turns off the boiler demand, so the boiler is not producing excess heat.

What are the benefits

With the electronic method when the water temperature in the manifold is satisfied the Electronic Head  closes and sends a signal to the boiler to turn off so the boiler only supplies the hot water directly to the manifold when it is required so you are not producing excess hot water when it is not needed.

The Electronic Head is located at the top right hand and replaces the white manual head. The water sensor is inserted into the dry pocket located at the bottom right hand side under the pump valve, this replaces the probe from the manual head See Drawing above.

To receive your FREE Upgrade please tick box provided on Buy Online or Contact Us on
0800 2321501