Underfloor heating in a full house

When installing underfloor heating into a Full House or Ground Floor your Manifold should be located in a central position so that your pipework doesn't run through rooms it is not going to be heating. You will have instructions showing pipe lengths & pipe centre's for each room some rooms may have more than 1 loop per room dependent on the size (Maximum loop length of 120m). Each room will be controlled with a thermostat smaller rooms maybe controlled with another room for example KITCHEN & UTILITY, HALL & WC. For a Quote for Full House or Ground Floor See MULTI ZONE or send a drawing via CONTACT US. Fixing rail should be laid 3/4 runs dependent on the length of room and clip every 1m-1.5m. For PDF Drawing Click Here