Underfloor heating in aluminium plates

When installing underfloor heating into aluminium plates the joists will need to be 400mm centre's as the aluminium plates are 390mm wide the pipework is clipped into the grooves, 2 runs per joist. Cover approximately 80 percent of the floor with the aluminium plates. Notch the end of the joists about 100mm from the wall this will carry the UFH pipe coming into the room and the pipework turning into the next joist see Drawing below (Maximum loop length of 120m). For Timber floors a different fixing method will be required Please CONTACT US to order. Or See MULTI ZONE for a written quote. Clips should be every 1m-1.5m. For PDF Drawing Click Here