Epic Profix Overlay Panel 600mm x 600mm x 15mm

Manufactured in the UK
High heat output
Can accept any floor finish (additional layers may be required)
Optional pre bonded insulation
Low build up
Fast response time
Quick install
Suitable over timber and concrete floors

Panel Type

Clear

Description
Additional information

Description

The 15mm Profix panel is a low profile solution to installing water based underfloor heating over the top of existing floors where the height allowance is minimal.

The system consists of a 15mm castellated plastic panel manufactured to accept a 12mm pipe at 150mm centres. The panel is then infilled with a levelling compound flush to the top so the total height is 15mm.

The inclusion of a levelling compound encapsulating the pipework acts as a thermal mass for the heat to transfer into the air temperature of the room.